This is the work for set up a DDC/DTR in one VirtualBox VM for testing purpose. The installation includes Docker Universal Control Plane (UCP) and DTR ( Docker Trusted Registry ). And configure DTR backend using Swift as DTR repository. The steps might be slight different from official Docker Doc but if you follow the step you should be able to re-produce whole setup.
===Create a VirtualBox VM===
Build a Ubuntu Server ( e.g 16.04 )
you need two NICs.
1. 1st NIC ( NAT )
===Preparation==
1. DNS configuration
$ vi /etc/hosts
e.g: this is just an example but you should be able to allow Swift Cluster Node resolve DDC/DTR node DNS ( or IP )
$ cat
/etc/hosts
127.0.0.1 localhost
192.168.99.101 ddc.xxx.idv ddc
2. Network Config
#enp03
NAT
#enp08
Host-only
Adapter and vboxnet0
2: enp0s3:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 08:00:27:85:29:64 brd
ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24
brd 10.0.2.255 scope global enp0s3
valid_lft forever preferred_lft forever
inet6 fe80::a00:27ff:fe85:2964/64 scope
link
valid_lft forever preferred_lft forever
3: enp0s8:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 08:00:27:3c:a6:c4 brd
ff:ff:ff:ff:ff:ff
inet 192.168.99.101/24
brd 192.168.99.255 scope global enp0s8
valid_lft forever preferred_lft forever
inet6 fe80::a00:27ff:fe3c:a6c4/64 scope
link
valid_lft forever preferred_lft forever
===Setup DDS / DTR===
1. # install docker engine
$ apt-get update && apt-get install docker-engine
PS: you can reference official docker doc: https://docs.docker.com/cs-engine/1.12/install/#/install-on-ubuntu-1404-lts
2. # install UCP
$ docker run
--rm -it --name ucp -v
/var/run/docker.sock:/var/run/docker.sock
docker/ucp install --host-address 192.168.99.101 --controller-port 444 --interactive
# remove ucp ( if you would like to wipe out ucp installation )
docker run --rm -it -v /var/run/docker.sock:/var/run/docker.sock --name ucp docker/ucp uninstall-ucp --interactive
3. # install DTR
docker run -it
--rm docker/dtr install --ucp-node ubuntuddc --ucp-insecure-tls
PS: This will be setup default 443 port for DTR. Setting up DDC and DTR at the same node is tricky, you need to give 444 to DDC and 443 to DTR to avoid the port confliction
# join
replicas dtr to cluster ( if you want to have multiple DTRs )
docker run -it
--rm docker/dtr join --ucp-node ubuntuddc --ucp-insecure-tls
===Double Check Credential===
# before docker pull or docker push image
# you might see the error message when u try docker login
If you see this in your Docker
$ docker login <dtr-domain-name>
x509: certificate signed by unknown authority
Configure your host
Ubuntu/ Debian
# Download the DTR CA
certificate
$ curl -k https://192.168.99.101:444/ca
-----BEGIN
CERTIFICATE-----
MIIBgTCCASegAwIBAgIUFJ63qsoTIODYFs0ZJXZT6Kps3VQwCgYIKoZIzj0EAwIw
HTEbMBkGA1UEAxMSVUNQIENsaWVudCBSb290IENBMB4XDTE3MDIwODIxMDkwMFoX
DTIyMDIwNzIxMDkwMFowHTEbMBkGA1UEAxMSVUNQIENsaWVudCBSb290IENBMFkw
EwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAE4PhC2mNXL/6qpivf+yv+nJHfYCZqDu9B
H16XGYAiK9WN0l3Txl/3qfdwD3uUzlIqpGWyo+lITPGHEjVib1EtvqNFMEMwDgYD
VR0PAQH/BAQDAgEGMBIGA1UdEwEB/wQIMAYBAf8CAQIwHQYDVR0OBBYEFKTl+cIz
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
fr48dqc=
-----END
CERTIFICATE-----
Thus I did this
$ curl -k https://192.168.99.101:444/ca
-o /usr/local/share/ca-certificates/ddc.xxx.idv.crt
# Refresh the list of
certificates to trust
$ sudo update-ca-certificates
# Restart the Docker daemon
$ sudo service docker restart
For example my
VirtualBox IP is 192.168.99.101 ( DDC / DTR at same VM )
$ docker login
192.168.99.101
Username:
admin
Password:
Login
Succeeded
===Configure in DTR Portal===
Go to Setting and Storage Tab
Go to Setting and Storage Tab
configure your Swift Credential
===Create Image Repository===
Go to
Repository and create a Repository "Repository = Docker Image", it's 1 vs 1 mapping after I try and error couple times.
PS: registry
name have to match your image name
Tag your image with DTR Repository Setting ( PS: you have to have image first , otherwise you will need $ docker pull busybox )
$ docker tag busybox 192.168.99.101/admin/busybox
$ docker tag busybox 192.168.99.101/admin/busybox
Push Image to DTR Repository
$ docker push
192.168.99.101/admin/busybox
The push
refers to a repository [192.168.99.101/admin/busybox]
38ac8d0f5bb3:
Pushed
latest:
digest: sha256:817a12c32a39bbe394944ba49de563e085f1d3c5266eb8e9723256bc4448680e
size: 527
===Double Check on DTR===
Then Double
Check in DTR, then you can see the tag, manifest … etc
===Double Check in Swift===
